Both front wings have rust, the drivers side looks repairable but the n/s is not, its too far gone.
I have managed to get a good second hand n/s/f wing.
It looks like the o/s wing has some rust behind the beading, so I removed to see how bad it was.
I ordered a new section of beading and a new lower 1/4 wing repair section, which I will weld into place.
This is the new beading, cut and shaped to fit the wing, and then welded into place, and painted with Bonda.
Here is the o/s/f wing lower section repair panel. I had to bend and panel beat it into shape and then cut it to the correct size before welding. In the end I went for a combination of a flange joint and also seam weld it.
No comments:
Post a Comment